Home     All Veneers     Anegre     Arapatanga     Ash     Beech     Birch     American Cherry     Ebony     Elm Burr     Indian Mahogany     Iroko     Khaya     Khaya Curl     Makore     Maple     Birdseye Maple     Mazur Birch     Movingue     Myrtle     Oak     Santos Rosewood     Sapele     Indian Satinwood     Sycamore     Teak     Tuari     American Walnut     European Walnut     Yew     Zebrano

Iroko The following information is posted with permission of Timber Research and Development Association (TRADA) and is taken from their red booklets Timbers of the World. © TRADA Chlorophora excelsa Benth. and Hook f.                     Family: Moraceae and C. regia A. Chev. Other names odum (Ghana and Ivory Coast); mvule (East Africa); kambala (Zaire); bang (Cameroons) ; moreira (Angola) ; tule. intule (Mozambique). Distribution C.excelsa has a wide distribution in tropical Africa, from Sierra Leone in the west, to Tanzania in the east. C. regia is confined to West Africa, where it occurs from Senegal to Ghana. There does not appear to be any significant difference between the timber of the two species. The tree C. excelsa attains very large sizes, reaching 45m or more in height and up to 2.7m in diameter. The stem is usually cylindrical and mostly without buttresses. It occurs in the rain, and mixed-deciduous forests. The timber When freshly cut, or when unexposed to light, the heartwood is a distinct yellow colour, but on exposure to light it quickly becomes golden-brown. The sapwood is narrow, being about 50mm to 75mm wide, and clearly defined. The grain is usually interlocked and the texture is rather coarse but even, and the wood weighs on average 660 kg/m3 when dried. Large, hard deposits of calcium carbonate called 'stone deposits, are sometimes present in cavities, probably as a result of injury to the tree. They are often enclosed by the wood and not visible until the time of sawing, though the wood around them may be darker in colour, thus giving an indication of their presence. Drying The timber dries well and fairly rapidly, with only a slight tendency to distortion and splitting. Strength Iroko has excellent strength properties, comparing well with teak, though weaker in bending and in compression along the grain. Durability Very durable. Working qualities Iroko works fairly well with most tools, though with some dulling effect on their cutting edges, especially when calcareous deposits are prevalent. On quarter-sawn stock, there is a tendency for grain to pick up due to interlocked grain, and a reduction of cutting angle to 1 50 is usually necessary to obtain a smooth surface. An excellent finish can be obtained if the grain is filled. It takes nails and screws well, and can be glued satisfactorily. Uses The timber is of great importance in both East and West Africa. It is valuable for ship and boat-building, light flooring, interior and exterior joinery, window frames, sills, stair treads, fire-proof doors, laboratory benches, furniture, carvings, marine uses such as piling, dock and harbour work, and produces a satisfactory sliced veneer.